JLS SERIES · DRIVES
AC Servo Drives
Four drive frames covering 50 W to 7.5 kW, single- or three-phase 220 V and three-phase 380 V, with position, speed and torque modes.
Drive and motor tuned together
Current loop, encoder resolution and braking are set at the factory for the motor in the same order, so commissioning is a parameter check rather than a tuning exercise.
Model range
| Model | Power range | Input voltage | Matched motor frames |
|---|---|---|---|
| JL160S-400-A1 | 50 W – 400 W | 1-phase 220 V | 60ST |
| JL160S-750-A1 | 500 W – 1.0 kW | 3-phase 220 V | 60ST / 80ST / 110ST |
| JL260S | 1.0 – 3.0 kW | 3-phase 220 V / 380 V | 80ST / 110ST / 130ST / 180ST |
| JL360S | 3.0 – 7.5 kW | 3-phase 220 V / 380 V | 130ST / 180ST |
Position, speed and torque control with mixed modes; pulse/direction, analog and communication reference inputs. Every drive is supplied with the matching motor, encoder cable and power cable as a tested set.
Protection and monitoring
- Overspeed, under/over voltage, over-current, overload
- Encoder fault, control-power fault, excessive position error
- Live monitoring of speed, position, command pulses, position deviation, torque, current and drive state
Auto-tuning on commissioning, with parameter sets stored per axis so a replacement drive can be dropped in without re-teaching the machine.
Three control modes
Position mode for indexing, speed mode for spindles and conveyors, torque mode for tension and press work — with hybrid modes between them.
Matched or standalone
Buy the drive with its motor and it arrives configured; buy standalone and we send the parameter file for your motor.
Commissioning support
Wiring diagrams, parameter lists and remote help on first start-up, in English.
Spares and lead time
Standard frames ship from stock; larger frames are built to order with a fixed lead time.
Tell us the axis
Motor, load, speed and controller brand — we return the drive model, cable set and a quote.